Refrigerator water dispensers can be a pain to fix – especially if you don’t have the right tools or know-how. In this article, we’ll outline the steps you need to take in order to diagnose and fix your water dispenser.
What could be the problem with your refrigerator water dispenser?
There could be a number of reasons why your refrigerator water dispenser isn’t working. Here are a few things to check:
-The coil inside the water dispenser may be bad. Try unplugging the water dispenser and checking if the water flow decreases. If so, it’s likely that the coil needs to be replaced.
-If you’ve been using the refrigerator for a while, the plastic components inside may have melted. This could lead to poor water flow or even no water coming out at all. In this case, you’ll need to replace the entire water dispenser.
-If the water dispenser is new, it might just need a little adjustment. Check to see if the water dispenser is dispensing the correct amount of water. If not, you’ll need to adjust the valve.
-If the water dispenser is over two years old, it might be time to replace it.
-If the water dispenser is brand new, there might be something blocking the valve. Try disconnecting the water line and then checking to see if the water flow decreases. If so, it’s likely that there’s a blockage somewhere in the line.
-If the water dispenser is over two years old, it might be time to replace it.
Troubleshooting Tips to Fix Your Refrigerator Water Dispenser
Fixing a broken water dispenser is not as hard as you might think. In most cases, all you need is a can of compressed air and a screwdriver. Here are some tips to help you fix your refrigerator water dispenser:
-If the water dispenser does not dispense water, first check to see if the water flow restrictor is clogged. This can be done by using a can of compressed air to blow through the restrictor until the water starts flowing. If the restrictor is clogged, it will need to be replaced.
-If the water dispenser still does not dispense water, make sure that the filter is installed properly. The filter should be located on top of the refrigerator near the water spout. If it is not installed properly, it will need to be replaced.
-If the water dispenser still does not dispense water, make sure that there is enough pressure in the line supplying the fridge. To test this, use a can of compressed air to try and push water through the line. If there is too much air pressure, then you will need to replace the line.
-If the water dispenser still does not dispense water, it may be due to a broken ice maker. To test this, remove one of the ice cubes from the freezer and try to dispense water from the dispenser. If the ice cube is not dispensing water, then the ice maker may be broken and needs to be replaced.
-If the water dispenser still does not dispense water, it may be due to a frozen water line. To test this, place a cold water hose between the refrigerator and the faucet. If the water dispenser starts dispensing water, then the line is frozen and needs to be replaced.
-If the water dispenser still does not dispense water, it may be due to a defective water filter. To test this, pour some tap water into a glass and try to dispense water from the dispenser. If the water does not start dispensing after a few seconds, then the filter may need to be replaced.
Conclusion
If you’re having trouble getting your refrigerator to dispense water from the spout, there are a few things you can try. First, make sure that the spout is clean and free of debris. If the dispenser still doesn’t work after cleaning it, you may have to replace it.
If that’s not the case, your problem could be with the water line or pump inside the refrigerator. In either case, repairing or replacing the refrigerator will likely require a professional technician.
Until then, continue trying some of these tips to see if they help: checking that your faucet is turned on at full flow; making sure there isn’t foreign material blocking up the water filter; pushing down on one side of the dispenser while you spray from another angle; using a plunger to create more suction and dislodge any obstructions; turning off all unnecessary appliances in close proximity to where water is being drawn from