Read about some possible causes and includes a few solutions to troubleshoot your Bissell carpet cleaner.
What is a Bissell Proheat?
A Bissell Proheat is a type of vacuum cleaner that uses hot water to clean carpets and upholstery. It is one of the most popular brands of vacuum cleaners on the market and is known for its reliability and performance. However, like any other appliance, the Bissell Proheat can experience problems from time to time. One common issue is that the suction may stop working properly. If this happens, there are a few things you can try to fix the problem.
Parts of the ProHeat
There are three main parts to the ProHeat: the brushes, the pump, and the heating element. Each of these parts can be replaced if they are not working properly.
The brushes are what help to clean the carpet. If they are not spinning, then they will not be able to clean the carpet. The pump is what provides the suction for the machine. If it is not working, then there will be no suction. The heating element is what helps to dry the carpet after it has been cleaned. If it is not working, then the carpet will take longer to dry.
How do I fix suction on my Bissell Proheat?
If your Bissell Proheat isn’t working as well as it used to or if the suction isn’t as strong as it should be, there are a few things you can do to try and fix the problem. First, check the filter and make sure it’s clean. If it’s clogged, it could be restricting the amount of suction. Second, check the brushes and make sure they’re spinning freely. If they’re not, they may be causing resistance and reducing suction. Third, check the hose for any blockages. Fourth, if all else fails, contact Bissell customer service for further troubleshooting assistance.
Replacement Parts for the Bissell ProHeat
If you’re having suction issues with your Bissell Proheat, there are a few things you can check before you need to replace parts. First, make sure that the brushes are free of debris and that the seal on the brush roll is intact. You can also try cleaning the filters to see if that improves suction. If those things don’t help, you may need to replace the pump or other parts. Here are some common replacement parts for the Bissell Proheat:
-Pump: The pump circulates water and helps create the suction needed to clean your carpets. If it’s not working properly, you may need to replace it.
-Brush roll: The brush roll helps loosen dirt and debris from your carpets as it rotates. If it’s damaged or not rotating properly, you’ll need to replace it.
-Filters: There are two filters in the Bissell Proheat – one in the water tank and one in the dirty water tank. If either of these filters is clogged, it can reduce suction. You may need to replace one or both filters depending on the problem.
-Hoses: There are two hoses in the Bissell Proheat – one from the pump to the brush roll and one from the dirty water tank to the pump. If either of these hoses is damaged, it can cause a loss of suction. You may need to replace one or both hoses
Conclusion
If your Bissell Proheat isn’t sucking up water like it should, there are a few things you can do to fix the problem. First, check the vacuum’s filters and make sure they’re clean. If they’re not, replace them. Next, check the brush roll and make sure it’s not clogged with dirt or hair. If it is, clear it out. Finally, check the water tank and make sure it’s full. If it’s not, fill it up and try again. If your Bissell Proheat still isn’t working properly after following these steps, you may need to take it to a professional for further diagnosis and repair.
